Suppor t@timetecinc. com
Easy Travel Router Setup
Connect the mini router WAN port to an internet
source via network cable.
Plug the micro-USB cable into the router with a
USB powered source, e.g., computer USB port or
wall charger.
(a) Wired Connection: Connect computer to the
Router LAN port with network cable.
(b) Wireless connection:
Network Name/SSID: MiniRouter
Network Password/Key: 123456789
Note: If you only use the device as a travel router,
you do NOT
need to proceed to Step1 and further.
Advanced Configuration
(Important) Connect PC to the mini router LAN
port with network cable.
Open up a browser, e.g. IE, and go to web
address: 192.168.100.1
A login is required:
Username: admin
Password: admin
Note: Maintain wired connection from PC to the
router until you finish the entire setup process for
advanced configuration.
Reset: If you have any difficulty during the setup,
press and hold the Reset button for more than 5
seconds to restore factory settings.
Advanced Setup— AP Router Mode
Complete Step 1.
In the configuration page of the Operation Mode,
select “Gateway mode” and then “Apply Change”
Go to the Setup Wizard, and follow the
instructions to finish the setup.
The Router needs to reboot to activate your
settings
Set the password in the Wireless encryptions to
protect your wireless connection.
Advanced Setup—Repeater Mode
Complete Step 1.
In Operation Mode, select “Bridge” and then “Apply Change”.
Go to "Wireless", "Basic Settings", select "Client" on "Wireless
Mode", select "Enable Universal Repeater Mode", and create
a name on "SSID of Extended Interface", apply changes and
click "Reboot Later".
In "Security", select the newly created SSID, choose
"WPA-Mixed" on "Encryption", and type a password on
"Pre-Shared Key". Apply changes and click "Reboot Later".
Go to "Site Survey", choose home network, click "Next", type
in the wifi password on "Pre-Shared Key", and hit "Connect".
Wait about 30 seconds and then reboot the mini router.
You repeater network with new SSID is ready to use.
Advanced Setup—Client Mode
Complete Step 1.
In Operation Mode, select “Bridge” and then “Apply Change”.
Go to "Wireless", "Basic Settings", select "Client" on "Wireless
Mode", apply changes and click "Reboot Later".
In "Site Survey", choose your home network, click "Next", type
in the wifi password on "Pre-Shared Key" and "Connect".
Wait about 30 seconds and then reboot the mini router.
Connect your device to one of mini router Ethernet ports with
a network cable, and now your wired-only device can also be
used wirelessly by client mode.
Note: When the router is in Bridge mode, both WAN and LAN ports
will become LAN ports.
Advanced Setup—WPS Function
This Router supports WPS. Before you use this
function, please enable WPS under Wireless
settings in the configuration website, and also set
the key for it.
How to use WPS：
Push the button on the bottom of the router.
The WPS LED on the router will start to
blink.
Push the WPS button on the device, it will
connect automatically.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels